基于级联滑窗的脉冲到达时间估计方法

A time of arrival estimation method for pulse based on cascaded sliding window

  • 摘要: 针对低信噪比下经信道化处理后的脉冲信号的到达时间估计精度问题,提出一种高效提取脉冲到达时间的方法。首先,对接收数据做信道化以提取出脉冲信号。其次,对脉冲信号进行相关预处理,然后提取信号包络并判决获得脉冲到达时间粗估计。基于此,利用原始采样数据,设置级联滑窗计算信号频点处的能量,通过信号频点处的能量变化精炼到达时间,得到精估计。相比于传统方法,该方法在低信噪比具有较高的估计精度,同时运算量更小,仿真结果验证方法的有效性。

     

    Abstract: Aiming at the estimated accuracy problem of time of arrival (TOA) of the pulse signal processed by channelization under low signal-to-noise ratio (SNR), an efficient method for extracting the time of arrival of the pulse signal is proposed. Firstly, the received data is channelized to extract the pulse signal. Secondly, the pulse signal is preprocessed by correlation, and then the signal envelope is extracted to estimate the coarse time of arrival. Based on the above operation, set cascaded sliding window to calculate energy at the signal frequency point according to the original sampling data, and the time of arrival of pulse is refined by the energy change at the signal frequency point. Compared with traditional methods, proposed method has higher estimation accuracy at low SNR and less computation. Validity of this method is proved by simulation results.

     

/

返回文章
返回