联合正交投影与CLEAN的测距仪脉冲干扰抑制方法

DME Impulse interference Mitigation Method Based on Subspace Projection and CLEAN Algorithm

  • 摘要: 针对L频段数字航空通信系统1(L-DACS1)以内嵌方式部署在航空无线电导航频段而产生的高强度测距仪脉冲信号干扰正交频分复用(OFDM)接收机问题,提出联合正交投影与CLEAN的测距仪脉冲干扰抑制方法。接收机首先通过将接收信号矢量投影到干扰信号正交补空间的方法消除高强度测距仪脉冲干扰,然后利用OFDM信号循环前缀的对称特性,采用CLEAN算法估计信号来向,然后通过波束成形提取OFDM直射径信号。计算机仿真表明:论文提出方法可有效克服测距仪脉冲及OFDM散射径信号的干扰,提高L频段数字航空通信系统1的链路传输的可靠性。

     

    Abstract: To mitigate the deleterious influence of distance measure equipment (DME) interference on Orthogonal Frequency Division Multiplexing (OFDM) receiver of L-band Digital Aeronautical Communications System 1(L-DACS1) operating as an inlay system, a new interference suppression receiver for L-DACS1 system is proposed based on joint subspace projection and CLEAN algorithm. Firstly, subspace projection algorithm is used to suppress the strong DME interference by projecting the array received signals on the orthogonal complement space of interferences. Then, CLEAN algorithm is proposed to estimate direction of arrivals of OFDM signals based on the repetition property of the cyclic prefix of an OFDM symbol .Finally, conventional beam forming algorithm is used for extracting the OFDM direct path signals. Computer simulation results show that the proposed OFDM receiver can effectively suppress the strong DME impulse interference and OFDM scattering signal to improve the reliability of the L-DACS1 system.

     

/

返回文章
返回